EN ISO 11680-1 pdf download Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC
This part of ISO11680 gives safety requirements and measures for their verification for the designconstruction of portable,hand-held,pole-mounted powered pruners having an integral combustion engine astheir power unit and using a drive shaft to transmit power to a cutting attachment consisting of a saw chaina reciprocating or circular saw blade with a 205 mm maximum outside diameter.Methods for the eliminatiotor reduction of hazards arising from the use of these machines and the type of information on safe workpractices to be provided by the manufacturer are specified.
This part of ISO 11680 deals with all significant hazards， hazardous situations or hazardous events with thexception of electric shock from contact with overhead electric lines (apart from warnings and adviceinclusion in the instruction handbook)， relevant to these machines when they are used as intended and underconditions of misuse which are reasonably foreseeable by the manufacturer.
NOTESee Annex A for a list of significant hazards.
This part of lSO 11680 is applicable to portable, hand-held, pole-mounted powered pruners manufactured afterits date of publication.
The following referenced documents are indispensable for the application of this document. For dreferences,only the edition cited applies. For undated references, the latest edition of the referenced documen(including any amendments) applies.
IsO 6531，Machinery for forestry – Portable chain saws — Vocabulary
ISO 7112:2008,Machinery for forestry — Portable brush-cutters and grass-trimmers — Vocabulary
ISO 7113:1999，Portable hand-held forestry machines — Cutting attachments for brush cutters — Single-piecemetal blades
ISo 8893，Forestry machinery — Portable brush cutters and grass-trimmers —Engine performance and fuelconsumption
lSO 12100:2010,Safety of machinery — General principles for design—Risk assessment and risk reductionISO 13857;2008,Safety of machinery – Safety distances to prevent hazard zones being reached by upperand lower limbs
ISO 14982:1998, Agricultural and forestry machinery —Electromagnetic compatility — Test methods andacceptance criteria
ISO 22867,Forestry and gardening machinery —Vibration test code for portable hand-held machines withinternal combustion engine-Vibration at the handles
ISO 22868,Forestry and gardening machinery —Noise test code for portable hand-held machines with internalcombustion engine – Engineering method (Grade 2 accuracy)
IEC 60745-1:2006，Hand-held motor-operated electric tools —Safety— Part 1: General requirements
3 Terms and definitions
For the purpose of this document,the terms and definitions given in lIS0 6531, ISO 7112 and ISO 12100 andthe following apply.
pole-mounted powered pruner
machine whose power source is attached via a long drive-shaft tube (pole) to a cutting attachment, designedto enable an operator to cut branches from a distance
NOTE See Figure 1 for an example of a pole-mounted powered pruner with integral combustion engine and a saw-chain cutting attachment within the Scope of this part of ISO 11680.
4 Safety requirements andlor protective measures4.1General
Machines shall comply with the safety requirements and/or protective measures of this clause. In addition,themachine shall be designed according to the principles of lSO 12100 for relevant but not significant hazardswhich are not dealt with by this part of Iso 11680.
The safe operation of a pole-mounted powered pruner also depends on the safe environment associated withthe use of personal protective equipment (PPE), such as gloves,slip-resistant footwear， and eye,hearing andhead protective equipment,as well as safe working procedures (see 5.1).
Except where otherwise specified in this part of lSO 11680， the safety distances specified in lSO 13857:2008,126.96.36.199 and 188.8.131.52，shall be met.