BS EN ISO 15547-2 pdf download

BS EN ISO 15547-2 pdf download

BS EN ISO 15547-2 pdf download Petroleum, petrochemical and natural gas industries — Plate-type heat exchangers — Part 2: Brazed aluminium plate-fin heat exchangers
5 Drawings and other data requirements
5.1,1The vendor shall furnish general arrangement drawings for each plate-fin heat exchanger for review.The drawings shall include the following information:
a)service, item number, project name and location, vendor’s shop order number and purchaser’s ordernumber;
6maximum allowable working pressure, design pressure including vacuum if applicable, test pressure.maximum design temperature, minimum design metal temperature and any restrictions regarding testingor operation of the plate-fin heat exchanger;
dimensions and location of supports;0
d)overall plate-fin heat exchanger dimensions;
e) type and details of fins used;
dpresence and location of any inactive areas:
g)mass of the plate-fin heat exchanger, both empty and full of liquid with a specific gravity of 1,0;
h)centre of gravity of the plate-fin heat exchanger for empty and operating conditions;
material specifications for all components;
allowable forces and moments on connections:
size, flange rating and facing, location, orientation, and flow identification of all connections;
applicable design codes.
5,1.2lf controlled torquing of flange bolting is required the vendor shall furnish torquing requirements
5.1.3 The vendor shall furnish detailed instructions on lifting and handling of the plate-fin exchanger.
5.1.4 The review of general arrangement drawings by the purchaser shall not relieve the vendor of theresponsibility of meeting the requirements of the purchase order.
5.1.5 After receipt of the purchaser’s general arrangement drawing review comments, the vendor shallfurnish the certified general arrangement drawings and the detail drawings.
5.1.6 if specified by the purchaser, the vendor shall furnish copies of applicable welding procedurespecifications and weld maps for review or record.
5.1.7If specified by the purchaser, brazing procedures shall be made available for purchaser’s review.
5.1.8lf specified by the purchaser, the vendor shall furnish copies of applicable calculations for review orrecord.
5.1.9 lf specified by the purchaser, the vendor shall furnish stress analysis calculations in accordance withthe methods prescribed by the applicable pressure design code for review or record.
5.1.10 The vendor shall furnish procedures for pressure and leak testing. and drvina for review.
5.2 Final records
5.2.1 The vendor shall furnish the purchaser with a user’s manual which shall contain the following:
a) technical description;
b) operating instructions (including any start-up or shut-down constraints);
c) installation and maintenance instructions (including lifting and handling);
d) data sheets and drawings (as-built).
5.2.2 The vendor shall retain, for at least five years, records which confirm compliance of the material and fabrication with the requirements of this part of ISO 1 5547.
6 Design
6.1 General
If the design method is based on proof testing, the vendor shall provide the necessary details to the purchaser for verification of compliance with the pressure design code.
6.2 Design temperature
z The purchaser shall specify a maximum design temperature and a minimum design metal temperature.
6.3 Design pressure
The plate-fin heat exchanger design shall not be based on differential pressure.

The previous

BS EN ISO 15302 pdf download

The next

BS EN ISO 15614-2 pdf download

Related Standards